Forward-Looking and Sustainable Window & Door Profiles for Easy Installation

If a window isn’t installed properly, it won’t matter how energy efficient it is. Installing windows on a building with exterior insulation isn’t easy.Rough openings have always been the weakest spot on any building for air and water infiltration. “Bumping” the window out only makes it more difficult to achieve a good air and water seal.

The window and the rigid foam or mineral wool need to line up on the same plane. This is the only way to have good drainage, proper cladding attachment, and to prevent compression of the insulation.

Triotherm+
Triotherm+ extends the masonry jamb in the insulation layer of the façade, as the load-bearing, dimensionally stable installation surface for the assembly parts to be fitted.
Triotherm+ profiles can introduce the resulting forces reliably into the load-bearing structure via the mechanical fastening. The permanently dimensionally stable Triotherm+ profiles always form a level plane for the regulation-compliant sealing of joints between construction elements.
Triotherm+
  • Is made from a high-density EPS (expanded polystyrene)
  • Exhibits load-bearing capacity, can be fitted to the load-bearing structure quickly and easily, and offer thermally isolated load transfer - thermal bridges from the structurally necessary fastening of construction elements are reduced to a minimum.
  • Can be integrated perfectly into the insulating zones of all façade systems.
The waste-free joining of the blaugelb Triotherm+ profiles brings clear advantages for the fitter by virtue of the extruded, positive-locking dovetail design.

Thanks to their low weight and compact dimensions, the blaugelb Triotherm+ profiles are unbeatably quick and straightforward to process. Expert sealing and mechanical fastening of the blaugelb Triotherm+ profiles to the load-bearing base only takes only a few minutes.
0 - 0 of 0 Products

No Products Found

Don't see the product you need?